PCI Lastogum Tanking Waterproofing Kit

Contents: 8k Lastogum, 1 litre primer for timber/plasterboard, 10 mt, Flex Tape, 2 pipe collars. Covers 5-7 mt sq.( 2 coats). Finest value kit available.

PCI Lastogum is the best quality wet room tanking available, and is made by BASF chemicals.
Suitable for all flat or vertical surfaces made of any material. Simple to use low-cost product for novices and experts alike.
Compatible with almost every type of under floor heating and ready for tiling with no further preparation.( please check with under floor heating manufacturer).

For under ceramic coverings in showers and bathrooms. With official test certificates

FIELDS OF APPLICATION
Liquid area waterproofing to be applied by roller, brush or trowel.

For indoor use. For walls and floors, sealing your wet shower room.

For applications not covered under the official test certificates according to ZDB leaflet Bonded waterproofing, edition 2005, for moistureresistance grades 0, A 01 and A 02. Resistance class A1 in accordance with the test principles to issue an official test certificate.

Application of undiluted PCI Lastogum to the substrate by roller, brush or trowel.

For wet areas not exposed to pressurised water, such as bathrooms, wet rooms, showers in residential buildings, hotels, old people's homes and hospitals.

On moisture-sensitive, absorbent substrates, e.g. plasters, plaster slabs, gypsum fibre boards, plaster boards, wooden chipboards, anhydrite screeds in moist and wet areas subject to usual domestic use.

On absorbent mineral substrates, e.g. concrete, screed, render, aerated concrete, cementitious levelling compounds for walls such as PCI Polycret 5 and/or PCI Polycret 20 and selflevelling compounds, e.g. PCI Periplan fein and PCI Periplan.

FEATURES AND BENEFITS
Waterproof, protects moisture-sensitive substrates.
Flexible, compensates tensions, deformations of the substrate, variations in temperature and vibrations.
Crack-bridging, high security even with subsequent cracks in the substrate.
Ready-to-use, easy to apply by roller, brush or trowel.
Two-coloured, for easier visual control of the layer thickness.

Resistant to lime water, ensures bonding between protective coating and mortar if the adhesive bed is constantly submerged in water.

Solvent-free, no harmful risk to the environment, can be used without any risk to health. With official Test Certificate issued by the Technical University of Munich for interior waterproofing under PCI bedding mortars