Wet Room Shower Tray Floor Kit - 1200 x 1200mm with Glass

• 1200 x 1200 x 20mm Tray Base
• Lightweight & Strong
• Centre Drain Position
• Pre-made 2% fall to drain
• Use on timber & concrete floors
• For tiled floor finishing
• Fully trimable by up to 50mm off each edge (equal amounts must be trimmed from each side)
• Ideal for creating flush ‘walk in’ showering areas (rest of floor will require boarding by 10mm)
• With 8mm x 2000mm high toughened glass screen in choice of lengths:
• Screen lengths available: 760mm, 800mm, 900mm, 1000mm, 1100mm or 1200mm all for same price
• Complete with drain and tanking kit
• Easy to install: WetBase installation instructions
• 5 years guarantee if fitted in accordance with manufacturer’s instructions.
• Money back guarantee if not 100% happy**
• FREE delivery to mainland UK*
• Made in the UK
• Part No: WBSCG-30

WetBase Shower Trays have been designed for use with walk in shower enclosures, providing a tileable shower base, avoiding the need for the traditional “step-in” white acrylic tray.

WetBase Standard wetroom bases allow for total flexibility and give the installer the option of building their own wetroom system. It is a lightweight flush floor panel with pre-made falls to drain, and is coated with a cementitious layer ready to receive a tiled surface.

Centre drains are more uniform in appearance and offer an easier tiling option that an offset drain.

Glass Screen:

We offer you a choice of 760mm, 800mm, 900mm, 1000mm, 1100mm or 1200mm length screens all at the same cost.

All our glass shower screens are made of toughened glass and are 8mm thick by 2000mm high.

The glass shower screen comes complete with a wall bracket and support arm.

For full fitting instructions please see:  Fitting the WetBase Wet Room Tray

NB: If you have a concrete floor or if there is no access under the flooring to locate the shower drain, then the tray can still be used by using a separate raised substrate.

• 1 x 1200 x 1200 under tray 20mm deep 2% fall.
• 1 x Drain with stainless steel grid (horizontal)
• 1 x drain connector 40mm outlet
• 1 x 1 litre primer
• 1 x 8KG tanking liquid covers 5 – 7sq m2
• 2 x pipe collars (around shower pipes)
• 1 x 10 metre flexi tape for wall and floor joints
• 1 x 8mm thick x 2000mm high Toughened Glass Shower Screen (Specify length size below)
• 1 x Wall Bracket for Glass Shower Screen
• 1 x Support arm for Glass Shower Screen