WetBase Wet Room Shower Tray Kit 1200 x 900mm

• 1200 x 900 x 20mm
• Lightweight & Strong
• Centre Drain Position
• Pre-made 2% fall to drain
• Use on timber & concrete floors
• For tiled floor finishing
• Fully trimable by up to 50mm off each edge (equal amounts must be trimmed from each side)
• Ideal for creating flush ‘walk in’ showering areas (rest of floor will require boarding by 10mm)
• Complete with drain and tanking kit
• Easy to install: WetBase installation instructions
• 5 years guarantee if fitted in accordance with manufacturer’s instructions.
• Money back guarantee if not 100% happy**
• FREE next working day delivery if ordered by 12noon
• Made in the UK
• Part No: WBSCK-16

WetBase Shower Trays have been designed for use with walk in shower enclosures, providing a tileable shower base, avoiding the need for the traditional “step-in” white acrylic tray.

WetBase Standard wetroom bases allow for total flexibility and give the installer the option of building their own wetroom system. It is a lightweight flush floor panel with pre-made falls to drain, and is coated with a cementitious layer ready to receive a tiled surface.

Centre drains are more uniform in appearance and offer an easier tiling option that an offset drain.

For full fitting instructions please see:  Fitting the WetBase Wet Room Tray

NB: If you have a concrete floor or if there is no access under the flooring to locate the shower drain, then the tray can still be used by using a separate raised substrate.

• 1 x 1200 x 900 under tray 20mm deep 2% fall.
• 1 x Drain with stainless steel grid (horizontal)
• 1 x drain connector 40mm outlet
• 1 x 1 litre primer
• 1 x 8KG tanking liquid covers 5 – 7sq m2
• 2 x pipe collars (around shower pipes)
• 1 x 10 metre flexi tape for wall and floor joints