• 1000 x 800 x 30mm
• LINEAR Drain Channel
• END drain location
• Choose drain outlet position from Left, Centre or Right, to avoid joists
• Pre-made 2% fall to drain
• Lightweight & Strong
• Under-boarding of WetBase® required to provide support
• Complete with horizontal Dallmer fast flow drain
• Horizontal drain sits approx. 92mm beneath tray
• Fully trimmable by up to 50mm off each edge (equal amounts must be trimmed from each side)
• Ideal for creating flush 'walk in' showering areas (rest of floor will require boarding by approx. 10mm)
• Designed and manufactured in Germany
• 20 years guarantee if fitted in accordance with manufacturer’s instructions

Jackoboard Paint-On Tanking Kit:

The Jackoboard tanking kit contains a rapid drying, brush/roller applied, single part flexible liquid membrane for use on rigid surfaces in bathrooms, wetrooms and showers. It can also be used to waterproof existing surfaces such as plaster, plasterboard or timber.

Suitable for all flat or vertical surfaces made of any material. Simple to use for novices and experts alike. Compatible with almost every type of under floor heating and ready for tiling with no further preparation (please check with under floor heating manufacturer).

For use under ceramic coverings in wet rooms, showers and bathrooms. Coverage 5 - 6sqm under normal conditions with recommended two coats.

Jackoboard Tanking Kit:
• 1 x 4KG Tanking liquid
• 1 x 1 Litre Primer Liquid
  
• 1 x 10 metre tape for wall and floor joints
• 2 x Internal sealing corners

Full product details: Jackoboard Wet Room Tanking Kit

Wet Room Tanking, Fixing & Sealing Kit:

A complete kit to install your wet room tray. Including flexible adhesive for bedding down the tray, a tanking kit for waterproofing and board fix for sealing the perimeter of the wet room tray.

Suitable for all flat or vertical surfaces made of any material. Simple to use for novices and experts alike. Compatible with almost every type of under floor heating and ready for tiling with no further preparation (please check with under floor heating manufacturer).

Tanking, Fixing & Sealing Kit:
• 1 x 4KG Tanking liquid - See above
• 1 x 10 kg Britflex S1 Rapidset flexible adhesive
• 1 x 290ml Jackoboard Board Fix Sealant

Full product details: Wet Room Tanking, Fixing & Sealing Kit

Jackoboard Plano Insulated Tile Backer Board

Jackoboard Plano Insulated Tile Backer Board is the ideal board for boarding out wet room floors and walls prior to tiling. Thanks to their extruded polystyrene foam core and the special coating on both sides, the JACKOBOARD® construction boards are the ideal base for plaster and tile. The surfaces of the JACKOBOARD® system provide a strong primer and can be used on virtually any substrate. At the same time, they are water repellent, thermally insulating, light and sturdy.

Suitable for all flat or vertical surfaces made of any material. Simple to use for novices and experts alike. Compatible with almost every type of under floor heating and ready for tiling with no further preparation (please check with under floor heating manufacturer).

JACKOBOARD® Plano. The construction boards can be cut to any desired shape and to any dimension. Thanks to the different thicknesses, there is no limit to the design flexibility of the construction boards for wall, floor and construction applications. They can be used on virtually any substrate and master every challenge thanks to their easy use.

Suitable for:
• Use on Walls & Floors
• Tiling
• Under Floor Heating
• Wet Rooms, Walk in Showers, Spas

Each board measures 600 x 1200mm. Available in 6mm, 10mm, 12mm, 20mm & 30mm thickness

Full product details: Jackoboard Plano Insulated Tile Backer Board

Sommer Evolve Wet Room Shower Screen

Add an optional quality Sommer Evolve 8mm thick by 2000mm high toughened safety glass shower screen in a choice of widths, finished with an easy clean coating as standard, comes complete with wall bracket and support arm (700mm screen & above).

Available in of 400mm, 500mm, 600mm, 700mm, 760mm, 800mm, 900mm, 1000mm, 1100mm, 1200mm or 1400mm length shower screens#

A life time guarantee and toughened 8mm glass gives you substance and style, in addition all Sommer wet room shower screens offer many premium features:

• Bclean coating: Easy clean glass finish
• Life time guarantee
• Toughened 8mm thick glass
• 2000mm high
• Wall fixing profile supplied
• Adjustable bracing bar supplied (1m)
• Fittings available in Chrome or Black
• Adjustment for secure and easy fixing (see below for further details)
• Optional floor to ceiling post available (Max height 2.6m) - Cannot be used in conjunction with optional 300mm return panel.
• Optional Angled Stabilising bar available (300mm)
• CE Approved - Toughened 8mm thick glass
• European safety glass approved - EN12150-1

#Screen sizes are nominal. All panels are undersized to allow for tiling when fitting to shower trays.

Sommer wet room shower screens are highly versatile and can be installed in many configurations including, One panel in a corner, One panel in an alcove, Walk through (with the use of two optional floor to ceiling posts), and with two panels in a corner to create a walk in enclosure.

Full product details: Sommer Evolve Wet Room Shower Screen

WarmUp Underfloor Heating - Sticky Mat

Warmup® electric underfloor heating, the world’s best-selling floor heating brand™, provides warmth throughout the whole room, giving a whole new meaning to heating and comfort. Warmup underfloor heating offers heat-up time in minutes rather than hours, avoiding overheating and wasting energy. Warmup electric underfloor heating mats are low build (3mm) and perfect for heating up a large or regular-shaped room.

The StickyMat System consists of a thin (1.8mm) loose wire evenly spaced and taped to a glass fibre mesh with pressure sensitive adhesive, which allows for the fastest and most secure installation method of electric underfloor heating. The system is available in a choice of 150 W/m² and 200 W/m² heat outputs.

150W/ m2 – power variant can provide primary heating in well-insulated areas. Insulation boards retain heat in the room for longer. More importantly, they prevent downward heat-loss. The 150W/ m2 StickyMat can be laid on both timber and concrete subfloors.

200W/ m2 – power variant is best suited for rooms or areas with a high heat-loss such as conservatories. Be sure to carry out a heat-loss calculation to assess the heating requirements of the room. This is especially the case if you are considering using underfloor heating as a primary heat-source under tiles in a high heat-loss area.

Full product details: WarmUp Underfloor Heating - Sticky Mat

WarmUp 3iE Programmable Underfloor Heating Thermostat

The 3iE is a programmable, energy-monitor thermostat that offers precise temperature control.

3IE provides the following:
• Rapid local heat-up and cool-down completely separate from other zones.
• Ten different set periods per day to get accurate control usage for all rooms.
• Easy and precise over-ride functionality by temperature and time at one button press.
• Floor temperature and air temperature control, either being the dominant choice.
• Self-learning capability for the end user to know when to turn the power on to achieve the desired temperature at the chosen time

Full product details: WarmUp 3iE Programmable Underfloor Heating Thermostat

WarmUp 6iE Smart Programmable Underfloor Heating Thermostat

The 6iE underfloor heating thermostat from Warmup is the Smartest way to control heating systems from the world’s best-selling floor heating brand.

The 6iE offers a quick, hassle-free installation and true ease of use for the user. The 6iE Smart Wi-Fi Thermostat combines advanced technology with premium design and materials to create the ultimate underfloor heating controller. It is quick to install and can be up and running within a matter of minutes.

Featuring the world’s first Smartphone touchscreen on a floor heating controller, the 6iE Wi-Fi thermostat offers true ease of use – simply scroll and swipe to set your ideal heat schedule. The 6iE can be personalised with custom photo backgrounds and its clean, with an ultra-thin (16 mm from the wall) design, it will look great in classic contemporary or simple modern homes. Personalise the 6iE with photo backgrounds, the only underfloor heating thermostat with this ability.

6iE Features & Benefits
• Automatic heat control with SmartGeo technology
• Can help save over £400 on your energy bills
• World’s first UFH controller with Smartphone touchscreen
• Compatible with all Warmup Underfloor Heating Systems
• High-quality, ultra-slim design, just 16mm from wall
• Weather-based Early Start - no wasted energy
• Helps find the most efficient heat settings for your home
• Customisable photo backgrounds
• Quick to install, set up in minutes using the QR code
• Market leading 12-year warranty when installed with Warmup heating systems

Full product details: WarmUp 6iE Smart Programmable Underfloor Heating Thermostat