Call us on 0800 280 8008

Mon - Fri 9am - 5pm

Free UK* Shipping On Orders Over £100

Rated EXCELLENT On Trustpilot

Prod Image
Prod Image
Prod Thumb Image
Prod Thumb Image

Contour Wet Room Waterproofing Tanking Membrane 10m²

£300.00
£600.00

SKU : 15WTK-10

Order in the next: 00 hours, 00 minutes, 00 seconds for Same Day Shipping*

Delivery Approx 1 - 2 Working Days

Selection Subtotal:

£300.00

Call our EXPERTS on FREEPHONE 0800 280 8008

100% money back guarantee if not fully satisfied*

Rated EXCELLENT by our customers

FREE delivery on orders
over £100

Description
Key Features
Contents

Contour wetroom tanking membrane is a unique bituminous, pre-formed flexible self-adhesive waterproof membrane. Consisting of a 1mm thick rubberised waterproof layer, incorporating a fabric mesh on one side.

Probably one of the best tanking membranes available for use in wetroom applications as it provides a thick industrial strength impermeable barrier to any water that may escape beneath the tiles. The membrane is self-adhesive and comes on a roll. Once installed tiles can be applied immediately - there is no curing time.

Although particularly suited to floor applications the membrane can also be applied to walls as an additional precaution. However, there is a maximum weight limit for wall mounted tiles when using and this should not exceed 20kg/m2.

The membrane can be used with underfloor heating. Note: Maximum effective temperature for is 32oC and should not be exceeded. Electrical heating max 150w.

Contour offer 2 different kit sizes of tanking membrane, 5m2 and 10m2.

Installation Instructions: Contour Tanking Membrane Instructions

Please note: Membrane is NOT compatible with the Wetrooms Online WetBase trays.

  • It is ideal for use on substrates, such as timber, masonry, concrete, plasterboards, gypsum & tile backer boards.
  • Once Applied is ready to tile immediately, no drying time
  • Quick & easy to apply
  • Membrane is cold applied, consisting of a 1mm thick butyl waterproof layer, incorporating a fleece on one side
  • Factory controlled thickness
  • Self-adhesive mat
  • 100% waterproof
  • No heating equipment required to fit
  • Can be installed over a thermal board.
  • Heating restricted at 32°. Electrical heating max 150w.
  • Lifetime of tile Guarantee when installed as per the manufacturers recommendations

  • 10m² of membrane (10m x 1m)
  • 500ml primer
  • 10m Reinforcing tape
  • 1 x Jointing compound
  • 4 x preformed internal corners

Description

Contour wetroom tanking membrane is a unique bituminous, pre-formed flexible self-adhesive waterproof membrane. Consisting of a 1mm thick rubberised waterproof layer, incorporating a fabric mesh on one side.

Probably one of the best tanking membranes available for use in wetroom applications as it provides a thick industrial strength impermeable barrier to any water that may escape beneath the tiles. The membrane is self-adhesive and comes on a roll. Once installed tiles can be applied immediately - there is no curing time.

Although particularly suited to floor applications the membrane can also be applied to walls as an additional precaution. However, there is a maximum weight limit for wall mounted tiles when using and this should not exceed 20kg/m2.

The membrane can be used with underfloor heating. Note: Maximum effective temperature for is 32oC and should not be exceeded. Electrical heating max 150w.

Contour offer 2 different kit sizes of tanking membrane, 5m2 and 10m2.

Installation Instructions: Contour Tanking Membrane Instructions

Please note: Membrane is NOT compatible with the Wetrooms Online WetBase trays.

Key Features

  • It is ideal for use on substrates, such as timber, masonry, concrete, plasterboards, gypsum & tile backer boards.
  • Once Applied is ready to tile immediately, no drying time
  • Quick & easy to apply
  • Membrane is cold applied, consisting of a 1mm thick butyl waterproof layer, incorporating a fleece on one side
  • Factory controlled thickness
  • Self-adhesive mat
  • 100% waterproof
  • No heating equipment required to fit
  • Can be installed over a thermal board.
  • Heating restricted at 32°. Electrical heating max 150w.
  • Lifetime of tile Guarantee when installed as per the manufacturers recommendations

Contents

  • 10m² of membrane (10m x 1m)
  • 500ml primer
  • 10m Reinforcing tape
  • 1 x Jointing compound
  • 4 x preformed internal corners

Man. Image

Contour

Since the late 1990’s Contour Showers has specialised only in manufacturing shower trays and enclosures for the elderly and special needs market. Today Contour continue to build on the company’s original success and replicate the strong values of customer service and innovation that characterise Contour Showers. Contour Showers now specialise in providing easy access and level access shower solutions that benefit the maturing and special needs population.

Learn More