Warmup Electric Wall Heating Sticky Mat 3D 200w

£84.00
£50.40
You save:
£33.60
SKU: 2SMFWXX
Underfloor Heating Mat Size
Please select the mat size above.
Underfloor Heating Thermostat
Please select a thermostat above.

Delivery approx 2 - 3 Working Days

 Back to: Bathroom Collection By Warmup

Warmup® StickyMat 3D, part of the Warmup Bathroom collection, offers radiant warmth for cold wet room & bathroom walls. It's the perfect way to increase heating power in smaller places. Featuring a self-adhesive backing for easy installation, the StickyMat 3D is available in a range of sizes and features unique in-built earthing technology, making it the only system suitable for use on walls straight out of the box.

Used in conjunction with a Warmup Underfloor Heating solution, the StickyMat 3D System is ideal for creating a 360 ͦ sense of warmth in your home. It has been developed by Warmup's in-house team of engineers and is recommended for installation with ceramic, stone or porcelain wall tiles. Using StickyMat 3D on walls means heating the bathroom is that much easier and eliminates the need for radiators for greater design freedom.

The mat has been specifically designed so that there is a continuous, 100% earth braid, making it fully compliant with the latest edition of the Wiring Regulations for wall heating applications, eliminating the need for a second earth screen during installation.

The pressure sensitive adhesive on the mesh securely binds the mats to the substrate, keeping them flat and ensuring the application of tile adhesive is snag free whilst allowing the mats to be easily repositioned as needed. The ultra-thin, 1.8 mm multistrand, dual core heating cable, is double insulated with an advanced fluoropolymer making it exceptionally tough and easy to tile over.

StickyMat 3D for Luxurious Hidden Wall Heat:

Using wall heating alongside a Warmup floor heater is the future of energy-efficient home heating and the StickyMat 3D Wall Heating System features state-of-the-art radiant technology to enhance the comfort and warmth of your bathroom. Whether you are renovating an existing room or specifying heating for a new-build project, an electric wall heating solution is ideal for warming up cold, tiled walls and bringing a touch of luxury to your bathroom or wet room.

Perfect for Heating Wet Rooms with Limited Floor Space:

Our unique wall heating system is ideal if you’re wishing to add to the heated area of a room when there is little available floor space and installing a system in your bathroom removes the need for traditional bulky radiators, allowing much greater design freedom. The gentle warmth produced by the system is ideal for a pre-heated walk-in shower and transforms your bathroom into your own personal spa.

Prevents Condensation Forming on Bathroom Walls:

Wall heating helps eliminate the typical condensation that quickly forms on bathroom walls, therefore keeping the room drier and fresher. This attribute has the added benefit of reducing the build-up of possible mould in the heated areas – dramatically improving the atmosphere of your bathroom or wet room.

Specifically Designed for Heating Tiled Walls:

Used in conjunction with a Warmup Underfloor Heating solution, the StickyMat 3D System is ideal for creating a 360 ͦ sense of warmth in your home. It has been developed by our in-house team of engineers and is recommended for installation with ceramic, stone or porcelain wall tiles. Its heating wires are ready attached to a self-adhesive backed mesh mat for a hassle-free installation.

Unique 360° Earthing Technology:

StickyMat 3D features a 100% continuous earth braid, making it fully compliant with the latest edition of the Wiring Regulations for wall heating applications. It utilises an ultra-thin, 1.8 mm multi-strand, dual-core heating cable which is double insulated with an advanced fluoropolymer, making it exceptionally tough and easy to tile over. StickyMat 3D is available as a 200 W/m² mat guaranteeing the quickest heat-up times and can be ordered in a range of sizes from 0.5m² – 2m².

Reduces Installation Times by 35%:

StickyMat 3D offers rapid installation times; simply roll out the 0.5-metre-wide mats in parallel runs and attach directly to the substrate. The pressure-sensitive adhesive on the mesh backing securely binds the StickyMat 3D to the wall which keeps the mats flat and ensures a smooth and easy application of tile adhesive whilst also allowing the mats to be easily repositioned as needed. Due to the range of sizes available, you can install several StickyMat 3D heating mats in one area for greater radiant warmth.

The StickyMat 3D System is BEAB Approved and CE marked, meeting the highest safety standards for your peace of mind and comes with a Lifetime Limited Warranty and Warmup’s renowned SafetyNet Installation Guarantee.

Compatible with Insulation Boards for Walls and Floors – Tile Directly Over:

Insulation is imperative in maximising the energy-efficiency of any underfloor or wall heating system and the StickyMat 3D has been designed to be installed with Warmup’s Insulation Boards. The boards rapidly improve the responsiveness of the system and when used as wall insulation, they can also double as tile-backing boards which you can tile directly onto. Warmup Thermal Insulation Tile Backer Board

Control Wall Heating and Underfloor Heating with the Same Thermostat:

You can control the StickyMat 3D Wall Heating System with the same thermostat used to control your Warmup Floor Heating System. If installing both a floor and wall heating system to one thermostat, you must wire the thermostat to take the reading from the floor sensor. A maximum of two heaters can be wired into one thermostat and after that a junction box is required for safe usage and the thermostat must be placed on a different wall, so that the in-built air sensor has an accurate reading of the room’s temperature.

Available in a Range of Sizes and Simple to Use:

The StickyMat 3D System takes the form of an electric heating mat with a self-adhesive backing that is easy to attach to the wall by a qualified engineer. Once connected and tested by an electrician, the system can be tiled directly over with your choice of bathroom wall tile finish. The system can be connected to your existing underfloor heating controller for true ease-of-use.

The wall heating system is available in 200 W/m² mats – ensuring the quickest heating response time for your room and can be purchased in four different sizes, heating areas from 0.5m² – 2m².

Warmup StickyMat 3D Features:

  • StickyMat 3D™ is available 200 W/m² mats for quickest heating response time.
  • Ultra-thin, 1.8 mm multi-strand, dual core heating cable is double insulated with an advanced fluoropolymer making it exceptionally tough and easy to tile over.
  • 100% continuous earth braid, making it fully compliant with the latest edition of the Wiring Regulations for wall heating applications.
  • Eliminates condensation and mould growth in heated areas.
  • Ideal for regular shaped rooms, where the 0.5 m wide mats can be rolled out in parallel runs.
  • Pressure sensitive adhesive securely binds the mats to the floor or wall keeping them flat for fast and secure installation.
  • BEAB Approved and CE marked meeting the highest safety standards for ultimate peace of mind.
  • Lifetime Warranty & SafetyNet Installation Guarantee.

Warmup StickyMat 3D Wall Heating Mat Installation

How to Modify/Shape the mat:

How to modify the  heating mat

Documentation:

Installation Manual: StickyMat 3D Wall Heating Mat

Technical Specification Sheet: StickyMat 3D Wall Heating Mat

 

warmup-underfloor-heating

Can I use the Warmup StickyMat System as a primary Heat Source?

If your room is well insulated and complies with modern insulation levels you should be able to use Warmup as the sole heat source.
However, if your house is an older property with low insulation properties it is likely that an additional heat source may be required.
Heat loss calculations can be carried out by a builder, architect or heating engineer.

What type of flooring can I use over the StickyMat system?

The StickyMat system is specifically designed for use under tiles and natural stone. For other floor coverings please consult with the Warmup technical team on
0845 345 2288.

Can the StickyMat system be cut?

In order to fit the mat into a specific area, it may be necessary to cut and turn the glass fibre mesh. Care must be taken not to cut or damage the heating wire. The heating wire/heating mat CANNOT be shortened - the correct size heater must be installed on the available floor space.

Can the floor probe / power supply cables be extended?

Both these wires can be extended up to 50 metres - please consult a qualified electrician for advice on extending the cable.

How long must I wait after installation before turning the system on?

The underfloor heating cannot be turned on until the flexible tile adhesive is fully dried. Please allow a minimum of 7 - 10 days. Turning the system on too early can force the flexible tile adhesive to dry too quickly, causing it to crack.