Linear END Drain Wet Room Walk In Shower Kit - 1500 x 900mm with Shower Screen

Linear Wet Room Kit with Shower Screen - End DrainLinear Wet Room Kit with Shower Screen - End Drain
Linear Wet Room Kit with Shower Screen - End DrainSommer Wet Room Shower ScreenLinear Wet Room Kit with Shower ScreenLinear Wet Room Kit with Shower ScreenDrain PlanPCI Lastogum Tanking KitWeber Sys Protect Tanking Kit
Rating: Not Rated Yet
Price
Variant price modifier:
Sales price £610.00
Sales price without tax £508.33
Discount
Tax amount £101.67
ManufacturerWetrooms Online
Description

FREE next working day delivery if ordered by 3pm

The Wetrooms Online Linear WetBase wet room floor / shower base is an easy to install linear level access ‘walk in shower’ floor tray. This kit comes complete with a Dallmer fast flow drain, stainless steel grill and a choice of 5kg liquid based (no mixing required) tanking kit, either PCI Lastogum or Weber Sys Protect for waterproofing the wet room, and a quality Sommer, 8mm thick by 2000mm high shower screen in a choice of lengths, finished with an easy clean coating as standard.

Our linear tray kit is the UKs first true linear drain system with the drain trough bonded in to the tray in the factory which eliminates installer error and maintains 100% waterproofing capability when installed correctly. It can be used in wooden floors and concrete floors. It can be tiled with large format tiles or mosaics.

We offer you a choice of 700mm, 760mm, 800mm, 900mm, 1000mm, 1100mm, 1200mm or 1400mm length shower screens.

Suitable for:   NOT Suitable For:  
Wooden or Concrete Floors

YES - Suitable For Use with Wooden or Concrete Floors

Vinyl Floor Finish NO - Not Suitable for Vinyl Floor Finish
Tiled Floor Finish

YES - Suitable For TILED floor finish

Wheelchair Use NO - Not Suitable for Wheelchairs
Under Floor Heating YES - Suitable For Use with Under Floor Heating    
Walk In Showers

YES - Suitable For Walk in Showers

   

 

The position of the drain exit is determined by the installer on site as the drain is cut into the trough by the user and thus can avoid joists or support beams.
The base of the tray is totally flat and is installed onto the wooden joists in the normal manner with support between the joists. It has fully adjustable drain and grid to accommodate various tile heights

It can be installed by any competent DIY person and as the drain trough is already installed into the tray cuts down on install time.

If you have a concrete floor or if there is no access under the flooring to locate the shower drain, then the tray can still be used by using a separate raised substrate. For full fitting instructions please see: Fitting the WetBase Wet Room Tray

Have a question about the WetBase or fitting it?

If you have a question about the WetBase or the fitting of it please see the following help articles:

Choosing the Correct Wet Room Tray
WetBase Shower Tray FAQ's

WetBase Shower Tray Fitting Instructions
Wet Room FAQ's

If you cant find an answer to your question in the above documents, or need further help or advice, please give our experts a call on 0800 280 8008, use the live chat function (in the bottom right corner) or send an email to This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Note: Shower Screen Delivery

Whilst the shower screen is delivered free of charge, it is excluded from the next working day delivery, and will follow the WetBase, drain and tanking kit approximately 2 - 3 working days later.
This is because we have to use specialist carriers due to the weight and fragile nature of the glass shower screen.

Please ensure that you have both access to your property and room of installation for the shower screen prior to ordering.

Please refer to our terms and conditions for full details of carriage etc.

Save 15% off Tile Backer Board when purchased with a WetBase Kit