For use with the Warmup DCM-PRO underfloor heating system.
The DCM-PRO mat sticks directly on the insulation board, with no extra adhesive required. Based on the heat output required, the cable is laid and spaced out in the castellation’s accordingly. The clear sizing based on the castellation’s of the mat provides quick and easy planning for installation, 2m2 of cable fits exactly 2m2 of mat etc. Sizing can be adjusted to increase or decrease coverage and power (see Spacing Guide below) . The DCM-PRO cable clips into the castellation’s of the DCM-PRO mat, no tools are required when installing the cable into the mat.
As soon as the mat is fitted, the cable is installed and cable resistance checked, tiling or self-levelling can be started. The DCM-PRO mat can be covered with flexible adhesive (for use with tiles) or self-levelling compound, allowing it to heat and protect any floor covering material that is certified for use with underfloor heating. This includes tiles, engineered wood, vinyl and carpet providing a constant output of 150wm2.
1m x 15m roll
Suitable for TILED or natural STONE floor finish
For use on Slab, Screed, Concrete, Timber Suspended & Batten Floors sub floors
Self adhesive Mat
Mat only 5.5mm thick
Composition POLYPROPYLENE MEMBRANE WITH SELF-ADHESIVE BACKING