Aqua Dec Linear 2 is a market leading innovation from Impey. It has been specifically designed to make installation easier - with no need to mitre the tiles in the corners. Stainless steel inserts are supplied to finish the tile edges, which must be either flush to wall, or covered with a wetroom glass panel.
The Impey Aqua Dec Linear 2 features two gradients to assist flow to the linear drain. The linear 2 comes complete with a 600mm linear drain capable of flows of 35 - 42 litres per minute (depending on room layoutand size of the Aqua Dec). The linear drain is shipped with a brushed stainless steel drain cover as standard. An optional tiled insert for the drain cover is also available.
Key features / points:
The Linear 2 creates a reliable and consistent gradient for wet room floors.
Easy installation means no special skills are required.
Complete with a fully removeable drain trap for easy cleaning.
Height adjustable tiling frame - catering for different thickness tiler
Drain outlet position is adjustable to avoid joists or other obstructions
Drain outlet flow rate approx 40 l/m
Tray thickness 22mm
Tile edging kit for edge of Dec and drain - up to 10mm thick tiles
Linear drain - 600mm
Full installation guide
NOT suitable for VINYL floor finish
It is NOT possible to trim the Aqua Dec Linear to size.
Under boarding of the Aqua Dec Linear is required.
The Linear flow drain requires a minimum 95mm clearance below the Aqua Dec.
A tanking membrane such as Impey Waterguard will need to be laid prior to tiling.
Download installation instructions / guide: Impey Linear Dec 2 Installation