The Wetrooms Online Linear WetBase wet room floor / shower base is an easy to install linear level access ‘walk in shower’ floor tray. This kit comes complete with a Dallmer fast flow drain, stainless steel grill, which when reversed is fully tileable to match the surrounding floor, complete with a choice of 5kg liquid based (no mixing required) tanking kit, either PCI Lastogum or Weber Sys Protect for waterproofing the wet room.
Our linear tray kit is the UKs first true linear drain system with the drain trough bonded in to the tray in the factory which eliminates installer error and maintains 100% waterproofing capability when installed correctly. It can be used in wooden floors and concrete floors. It can be tiled with large format tiles or mosaics.
Fully Tileable Drain Cover:
The drain cover is ideal for tiling to match the surrounding floor, with a 12mm depth.
The position of the drain exit is determined by the installer on site as the drain is cut into the trough by the user and thus can avoid joists or support beams.
The base of the tray is totally flat and is installed onto the wooden joists in the normal manner with support between the joists. It has fully adjustable drain and grid to accommodate various tile heights
It can be installed by any competent DIY person and as the drain trough is already installed into the tray cuts down on install time.
If you have a concrete floor or if there is no access under the flooring to locate the shower drain, then the tray can still be used by using a separate raised substrate. For full fitting instructions please see: Fitting the WetBase Wet
This tray is 30mm thick, this means that in most circumstances it will sit 10mm above the floor boards when fitted. Therefore, 10mm tile backer board should be used to bring the remainder of the floor up to level prior to tanking and tiling.
Have a question about the WetBase or fitting it?
If you have a question about the WetBase or the fitting of it please see the following help articles:
Choosing the Correct Wet Room Tray
WetBase Shower Tray FAQ's
WetBase Shower Tray Fitting Instructions
Wet Room FAQ's
Optional Shower Screen:
We can also supply this wet room kit with an optional, quality, 8mm thick, 2000mm wide, toughened glass shower screen panel which is available in a selection of sizes.
The shower screen is finished with an easy clean coating as standard and comes complete with wall fixing channel and bracing bar.