- 900 x 900 x 20mm
- CENTRE DRAIN
- UNDER-SUPPORT REQUIRED
- COMPLETE WITH DRAIN & TANKING
- TRIMABLE BY 50MM OFF EACH EDGE
- 20 YEAR GUARANTEE
- WOOD OR CONCRETE SUBFLOOR
- TILED FLOOR FINISH
- WET ROOMS
- LEVEL ACCESS
- RAISED ON PLATFORM
- UNDERFLOOR HEATING
NOT SUITABLE FOR
- VINYL FLOOR FINISH
- USE WITH WHEELCHAIRS
- FITTING DIRECT ON JOISTS
The Wetrooms Online WetBase Standard wet room floor / shower base is an easy to install ‘walk in shower’ floor tray, with a classic square design drain outlet. This kit comes complete with a Dallmer fast flow drain and stainless steel grill. Complete with a choice of Jackoboard 5kg liquid based (no mixing required) tanking kit for waterproofing the shower area walls and floor, or a complete Tanking, Fixing & Sealing Kit for fixing the WetBase, waterproofing the floor and walls in addition to sealing the perimeter of the tray where it meets the wall / surrounding floor. The perfect solution for installing a wet room or Walk in Shower.
Designed and manufactured in Germany, the WetBase Standard is a premium wet room floor former, with a 20 year guarantee when installed in accordance of the instructions. The tray can be trimmed by up to 50mm off each edge of the tray. Suitable for installation in both wooden and concrete floors, the WetBase standard is designed to be installed flush to the surrounding floor (the surrounding floor level will need to be raised with Tile Backer Insulation Board), and over tiled to create a level access showering area.
The Dallmer drain (supplied) comes complete with a pressed steel drain cover (as shown right). This can be upgraded to a Octad drain cover. Manufactured for Wetrooms Online from 5mm thick stainless steel. Laser cut for a smooth, brushed stainless steel finish.
Have a question about the WetBase or fitting it?
If you have a question about the WetBase or the fitting of it please see the following help articles:
Choosing the Correct Wet Room Tray
WetBase Shower Tray FAQ's
WetBase Shower Tray Fitting Instructions
Wet Room FAQ's
Add a Sommer Evolve Shower Screen and save ££'s based on seperate Prices:
As an option you can add a quality Sommer Evolve 8mm thick by 2000mm high toughened safety glass shower screen in a choice of widths, finished with an easy clean coating as standard, comes complete with wall bracket and support arm (700mm screen & above).
Choice of 400mm, 500mm, 600mm, 700mm, 760mm, 800mm, 900mm, 1000mm, 1100mm, 1200mm or 1400mm length shower screens
• Easy clean finish
• 2000mm high, 8mm thick
• Wall fixing profile supplied (chrome finish)
• Adjustable bracing bar supplied with screens 700mm & over (1m, chrome finish)
• Adjustment for secure and easy fixing
Screen sizes are nominal. All panels are undersized to allow for tiling when fitting to shower trays.