AKW FormSafe Wet Room Tanking Membrane 10m²

You save:
SKU: 23611

Delivery currently 5 - 10 Working Days.

 Back to: Wet Room Tanking Membrane Mat

FormSafe is a unique bituminous, pre-formed flexible self-adhesive waterproof membrane. Consisting of a 1mm thick rubberised waterproof layer, incorporating a fabric mesh on one side.

FormSafe is probably one of the best tanking membranes available for use in wetroom applications as it provides a thick industrial strength impermeable barrier to any water that may escape beneath the tiles.The membrane is self-adhesive and comes on a roll.  Once installed tiles can be applied immediately - there is no curing time.

Although particularly suited to floor applications FormSafe can also be applied to walls as an additional precaution.  However, there is a maximum weight limit for wall mounted tiles when using FormSafe and this should not exceed 20kg/m2.

FormSafe can be used with under floor heating. Note: Maximum effective temperature for FormSafe is 32oC and should not be exceeded. Electrical heating max 150w.

AKW offer 2 different kit sizes for FormSafe, 5m2 and 10m2.

At A Glance:
It is ideal for use on substrates, such as timber, masonry, concrete, plasterboards, gypsum & tile backer boards
Once Applied FormSafe is ready to tile immediately, no drying time
Quick & easy to apply
Factory controlled thickness
Self-adhesive mat
100% waterproof
No heating equipment required
Can be installed over a thermal board. Heating restricted at 32°. Electrical heating max 150w.
Lifetime of tile Guarantee

10m² of FormSafe membrane (10m x 1m)
500ml FormSafe primer
10m Reinforcing tape
310ml Jointing compound

FormSafe Fitting Instructions (PDF)

Please note: AKW FormSafe is NOT compatible with the Wetrooms Online WetBase trays.