SPECIFICATION
- 1135 x 770 x 22mm
- UNDER-SUPPORT NOT REQUIRED
- COMPLETE WITH DRAIN (TILED OR VINYL)
- SUPPORTS UP TO 254KG
- CAN BE TRIMMED
- LIFETIME GUARANTEE*
SUITABLE FOR
- WOOD OR CONCRETE SUBFLOOR
- TILED FLOOR FINISH
- VINYL FLOOR FINISH
- WET ROOMS
- LEVEL ACCESS
- RAISED ON PLATFORM
- USE WITH WHEELCHAIRS
- FITTING DIRECT ON JOISTS
- UNDERFLOOR HEATING
NOT SUITABLE FOR
- MICRO-CEMENT
The AKW Tuff Form wet room / walk in shower tray is a lightweight yet strong floor former that is suitable for use with wheelchair showering and can accept VINYL or TILED flooring making it the ideal choice for both disabled showers and family wet rooms or where combined useage is required. Tens of thousands of installations worldwide, so it’s popular – and proven!
Drain Options:
Available with standard drains (Max flow rate 45L/min) for vinyl or tiled floor finish, with a depth of 125.6mm beneath the Tuff Form Dec.
Alternatively low profile (depth beneath tray 61mm, flow rate 27 L/min) drain options are also available for vinyl or tiled floor finish.
At a Glance:
- 1135 x 770 x 22mm
- Creates a full level access showering solution
- Exceptionally strong to accommodate a user with wheelchair and a carer
- Superior strength and rigidity providing excellent water integrity with comfort and safety underfoot
- Maximum weight capacity 40 stone / 254kg
- Suitable for both wooden and solid floors
- Formed from compressed GRP
- Can be cut to length or trimmed to within 150mm of the waste without losing any strength integrity
- The ribbed design of the underside eliminates slippage or float during installation
- Offset waste position to avoid joists pipework
- Tuff Form® depth is 22mm
- Easily trimmed on site to enable fast and simple installation
- Pre-formed fixing holes
- Comes with choice of waste - Choose VINYL or TILED
- Lifetime guarantee if fitted in accordance with manufacturers instructions
Downloads:
AKW Tuff form Installation Instructions
AKW Tuff Form Technical Data Sheet
