Contour ShowerDec Wet Room Former


The new Impey Showers Aqua Dec Easy Fit is a wet room tray with a built in gradient to the dran, it has a computer designed cellular structure, which is compression moulded from high glass content SMC to provide the strongest most rigid construction on the market. It requires no under boarding and will support over 300kg (47 stone) when fixed directly to standard floor joists.

The new Aqua Dec Easy Fit solves the potential installation problem of the drainage point being obstructed by joists within timber floors. A unique, patent protected drainage feature allows the installer to rotate the drain aperture to any position that will avoid the joist, or any other under floor obstruction.

The Aqua Dec Easy Fit requires no underboarding and will support over 300kg (47 stone) when fitted directly to standard floor joists.

The Aqua Dec Easy Fit is designed to provide the gradient required in the showering area for drainage. What makes them so special is their extreme strength and rigidity, whilst only being 22mm thick at the outer rim. This low profile is specially engineered to be the same depth as standard floorboards. You simply remove the floorboards and fix it directly to the floor joists.

All Impey Aqua Dec Easy Fit floor formers are supplied as standard with the UTT01/H tiled floor gully with a horizontal outlet – a high quality water trap featuring a 50mm water seal, flexible 43mm outlet. 

Click on the headings below for further details:

{slider Benefits|blue|closed}

Rotating drain
The EasyFit drain plate can rotate 360 degrees and avoid all underfloor wet room obstructions. The eccentric drain also features three locating rings, to provide superior hold between the Dec and the rotating drain plate.

Unbeatable strength
The new Aqua Dec EasyFit wet room Dec is stronger than the original Aqua-Dec and requires NO UNDER BOARDING

The Aqua Dec EasyFit is over 20% lighter than the original Aqua-Dec. The unique EasyFit material is also stronger but lighter.

Easily trimmable
The Aqua Dec EasyFit wet room Dec can be cut anywhere up to the solid surround with a standard handsaw.

EasyFit is 22mm thick
The new Aqua Dec EasyFit is consistently 22m thick around the perimeter.

Underside cellular structure
The underside spoke pattern provides increased rigidity to the structure of the Dec.

Wooden or concrete floor installation
Aqua Dec EasyFit can be fitted on wood and concrete floors as the spoke structure bonds well with wet concrete.

Complete range of sizes
The new Aqua Dec Easy Fit is available in eleven sizes from a compact 800mm square to the most spacious 1500 x 1200mm option.

Straight edge
The corners of the Aqua Dec Easy Fit have a straight edge to ensure it can be fitted flush against floorboards.


{slider Installation|blue|closed}


Impey AquaDec EasyFit - The easiest way to install a wet room.

The most revolutionary floor former Impey have ever produced. AquaDec EasyFit is lighter, easy to trim, super strong (requires no under boarding). The AquaDec EasyFit also has a unique patented rotating drain to help avoid any under-floor obstructions such as joists and pipework.

Before the Impey AquaDec EasyFit, a typical installation of a wetroom floor former initially required the wetroom area to be under boarded with a ply-wood board. Eliminating this process with AquaDec EasyFit, has significantly reduced installation time.

Download the Impey AquaDec EasyFit Installation Guides:

Impey AquaDec EasyFit for Tiled Floors (PDF)

Impey AquaDec EasyFit for Vinyl Floors (PDF)