Contour Wet Room Waterproofing Tanking Membrane 5m²

£360.00
£225.00
You save:
£135.00
SKU: 15WTK-05
 Back to: Wet Room Waterproofing / Tanking

Contour wetroom tanking membrane is a unique bituminous, pre-formed flexible self-adhesive waterproof membrane. Consisting of a 1mm thick rubberised waterproof layer, incorporating a fabric mesh on one side.

Probably one of the best tanking membranes available for use in wetroom applications as it provides a thick industrial strength impermeable barrier to any water that may escape beneath the tiles.The membrane is self-adhesive and comes on a roll.  Once installed tiles can be applied immediately - there is no curing time.

Although particularly suited to floor applications the membrane can also be applied to walls as an additional precaution.  However, there is a maximum weight limit for wall mounted tiles when using and this should not exceed 20kg/m2.

The membrane can be used with underfloor heating. Note: Maximum effective temperature for  is 32oC and should not be exceeded. Electrical heating max 150w.

Contour offer 2 different kit sizes of tanking membrane, 5m2 and 10m2.

At A Glance:
It is ideal for use on substrates, such as timber, masonry, concrete, plasterboards, gypsum & tile backer boards
Once Applied is ready to tile immediately, no drying time
Quick & easy to apply
Membrane is cold applied, consisting of a 1mm thick butyl waterproof layer, incorporating a fleece on one side

Factory controlled thickness
Self-adhesive mat
100% waterproof

No heating equipment required
Can be installed over a thermal board. Heating restricted at 32°. Electrical heating max 150w.
Lifetime of tile Guarantee when installed as per the manufacturers recommendations

Contains:
5m² of membrane (10m x 1m)
500ml primer
10m Reinforcing tape
1 x Jointing compound
4 x preformed internal corners

Installation Instructions: Contour Tanking Membrane Instructions

Please note: Membrane is NOT compatible with the Wetrooms Online WetBase trays.