Contour Falcon 30 Low Profile Anti Slip Shower Tray

The Contour Falcon 30 is a low profile, high performance shower tray just 30mm in height. Manufactured by Reinforced SMC (Sheet Moulding Compound) construction from a combination of resin and fibreglass to form a strong and consistent floor former, the Falcon 30 is tested to withstand 100 stone / 635Kg and is self-supporting, without the need to be bedded down onto a sand & cement mix.

The tray can be trimmed by 300mm, and comes with a unique end cap that easily screws into the cut end to conceal the cut and form a watertight seal at the same time. The Falcon 30 can be recessed into the floor by 30mm for level access.

The anti-slip surface has been rated ‘best in class’ to DIN 51097:1992 Class ‘C’, the highest achievable classification. The easy clean surface Complies to ISO 22196: 2011 international standard for the measurement of antibacterial activity for MRSA on plastic and non-porous surfaces.

Supplied complete with a 50mm water seal drain, 1½." outlet.  Flow rate in excess of 35l/m.

Contour Falcon 30 Shower Tray Points

Purchase eligible wet room products VAT free

If you are purchasing wet room equipment and fittings (trays, grab rails and seats etc) and are registered disabled, or they are for use by a person registered as disabled, you may be eligible for VAT relief on the items.
For full details and eligibility criteria please see the following page: VAT Relief on Wet Room Purchases

 

Contour Falcon 30 Low Profile Anti Slip Shower Tray