- 1200 x 900 x 22mm
- OFFSET DRAIN
- UNDER-SUPPORT REQUIRED
- COMPLETE WITH DRAIN & GRILL
- TRIMABLE BY 50MM OFF EACH EDGE
- 10 YEAR GUARANTEE
- WOOD OR CONCRETE SUBFLOOR
- TILED FLOOR FINISH
- WET ROOMS
- LEVEL ACCESS
- RAISED ON PLATFORM
- UNDERFLOOR HEATING
NOT SUITABLE FOR
- VINYL FLOOR FINISH
- USE WITH WHEELCHAIRS
- FITTING DIRECT ON JOISTS
The AKW DuraForm range makes creating a wet room more affordable than ever. Constructed from remarkably strong expanded polystyrene sandwiched between cement and fibreglass, it is lightweight, easy to handle and easily cut to size. Seven different sizes and a load capacity of 25 stone/158kg make DuraForm one of the strongest and most adaptable formers on the market
Features and Benefits:
+ Lightweight and easy to handle to ease installation
+ 22mm thickness
+ Offset drain position - Easier to avoid joists etc
+ 25 Stone/158kg weight limit accommodates users up to this weight when tiled
+ Available in 7 sizes to provide options for all sizes and styles of bathroom
+ Expanded polystyrene core with 2mm cement and fibreglass facings
+ Supplied with GW50 waste and Stainless Steel waste cover / grill
GW50 waste & Stainless Steel Grill:
+ Flow rate 43 litres per minute
+ Built in filter
+ 124mm deep below mounting surface
+ 50mm threaded waste fitting
+ Meets British standards, BS EN 274 Part 2:2002
Optional Jackoboard Tanking / Waterproofing Kit:
The optional tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals.
Ready to use, no mixing required and easy to apply with a roller.
The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc.
The contents are all INSIDE the bucket and the contents are protected in the bucket with polystyrene infill's to stop transit damage.The instructions are printed on the rear of the tanking kit.
For instructional video on the preparation and waterproofing (tanking) of your wet room or walk in shower see: Tanking-a-Wet-Room
Optional Tanking Kit, Fixing & Sealing Kit
A complete kit to install your wet room tray. Including flexible adhesive for bedding down the tray, a tanking kit for waterproofing and board fix for sealing the perimeter of the wet room tray.
Have a question about the AKW DuraForm or fitting it?
If you have a question about the AKW DuraForm or the fitting of it please see the following help articles:
Choosing the Correct Wet Room Tray
Wet Room FAQ's
AKW DuraForm Installation Guide
AKW GW50 Drain Datasheet
Add a Sommer Evolve Shower Screen and save ££'s based on seperate Prices:
As an option you can add a quality Sommer Evolve 8mm thick by 2000mm high toughened safety glass shower screen in a choice of widths, finished with an easy clean coating as standard, comes complete with wall bracket and support arm (700mm screen & above).
Choice of 400mm, 500mm, 600mm, 700mm, 760mm, 800mm, 900mm, 1000mm, 1100mm, 1200mm or 1400mm length shower screens
• Easy clean finish
• 2000mm high, 8mm thick
• Wall fixing profile supplied (chrome finish)
• Adjustable bracing bar supplied with screens 700mm & over (1m, chrome finish)
• Adjustment for secure and easy fixing
Screen sizes are nominal. All panels are undersized to allow for tiling when fitting to shower trays.