ELECTRIC UNDERFLOOR HEATING
MASSIVE SAVINGS OFF RRP ON SELECTED WARMUP ELECTRIC UNDERFLOOR HEATING
AND BATHROOM COLLECTION PRODUCTS
NO CODE REQUIRED - SAVING ALREADY APPLIED
Add a touch of luxury to your wet room or bathroom with electric underfloor heating. Quick and easy to install and use, underfloor heating from Warmup can be used under tiled and natural stone floors. With a range of stylish thermostats, controlling the temperature could not be easier.
However, underfloor heating is not simply an added luxury, it is an ideal way to heat your bathroom or wet room. Underfloor heating is energy efficient as it gives the user control, provides rapid heat up and high efficiency heating. It requires significantly less energy as you are not heating the ceiling area and it enables the temperature to be accurately controlled as needed, allowing end users to heat the room(s) they want, with no energy wasted.
Wetrooms Online only sell underfloor heating from the leading manufacturer Warmup, being an authorised Warmup online retailer, you can be assured of some of the most competitive prices, coupled with expert product knowledge, and amazing customer service.
We currently offer two types of electric underfloor heating from Warmup: DCM-Pro System and StickyMat System. Both systems are quick and easy to install. For an overview please click on the system of choice below.
Warmup StickyMat System:
Warmup StickyMat underfloor heating system is suitable for all projects: new build, retrofits and refurbishments. The StickyMat system consists of a thin loose wire evenly spaced and taped to a glass fibre mesh with pressure sensitive adhesive, reducing installation time by 35%, for the fastest and most secure installation method of electric underfloor heating.
Warmup StickyMat comes in two different power variants; 150W/m2 and 200W/m2, so it is ideal for use as a primary heat source and in rooms with high heat-loss such as conservatories.
• 150W/m2 – power variant can provide primary heating in well-insulated areas. Insulation boards retain heat in the room for longer. More importantly, they prevent downward heat-loss. The 150W/m2 StickyMat can be laid on both timber and concrete subfloors.
• 200W/m2 – power variant is best suited for rooms or areas with a high heat-loss such as conservatories.
Be sure to carry out a heat-loss calculation to assess the heating requirements of the room. This is especially the case if you are considering using underfloor heating as a primary heat-source under tiles in a high heat-loss area.
Warmup DCM-PRO System:
The Warmup DCM-Pro system is the fastest way to install a heated decoupling system in all areas; in fact, its 40% faster than standard underfloor heating membranes.
The patent pending self-adhesive underside acts as a self-healing decoupling layer and eliminates the need for the need for an adhesive layer, reducing both time and costs.
One of the main advantages of the self-adhesive properties of the DCM-PRO is no waiting time. As soon as the mat is fitted, cable installed and cable resistance checked, tiling or self-levelling can be started.
The DCM-PRO cable clips into the castellation’s of the DCM-PRO mat. No tools are required when installing the cable into the mat.
The sizes of the mat are designed for convenient sizing so that 2m2 of cable fits exactly 2m2 of mat. The spacing of the cable can, however, be adjusted to increase or decrease coverage and power. You don’t need any tools to install the system – this makes applying the cable in equal parallel lines to the castellation’s of the mat effortless.
The standard specific heating load of the DCM-PRO system is 150W/m². By adjusting the cable spacing, the installation can be customised to suit both the floor coverage and heat load requirements.
