Impey WaterGuard Wet Room Waterproofing Tanking Membrane Kits
SKU : WG5
You May Also Need
Selection Subtotal:
£268.00
Impey WaterGuard membrane kits are the next generation of wetroom waterproofing systems. It provides a faster and easier method of tanking a leak-free wetroom area.
WaterGuard® features a new fleece membrane with a self adhesive butyl rubber backing, which is fast and easy to install.
WaterGuard provides the complete leak-proof sealing solution, at just 1mm thick WaterGuard is strong, flexible and versatile making tanking a wet room faster and easier. It comes with a lifetime guarantee*, so you can install with complete confidence.
Unlike many other systems Impey WaterGuard® can be tiled as soon as it has been fitted saving both installation time and cost.
*Lifetime of the replacement of tiles.
Description:
Self adhesive on one side:
WaterGuard has a butyl rubber adhesive on one side only and a co-polymer surface on the other. This makes installation much easier as the installer can work on the membrane without getting stuck.
Preformed corners (Floor Kits Only):
Sealed, pre-formed internal and external corners reduce the likelihood of leaks. Eliminating the time consuming process of manually creating corners as with Tilesafe.
Superior waterproofing capabilities:
Tests have proven that WaterGuard provides superior waterproofing capabilities to Tilesafe. The test was conducted with a 150mm head of water over a series of weeks. No leak from WaterGuard.
Excellent crack bridging properties:
Tests have shown that WaterGuard has superior lateral movement (5mm)
absorption properties caused by the shifting and drying of floors over time.
Not sensitive to chemicals:
Can be used with epoxy grout and solvent based sealers for stone tiles - unlike Tilesafe.
Supplied with a butyl sealant:
Part of the pack, so no need for the installer to purchase separately. Can also be used to repair small holes in the membrane, if damaged.
Guide lines for easy measurement:
Pre-printed grid lines provide an accurate guide when trimming the membrane.
Supplied with 150mm wide jointing tape:
WaterGuard cannot be overlapped, so a jointing tape is supplied to create a watertight seal at any joints.
Please note: IMPEY WATERGUARD is NOT compatible with the Wetrooms Online WetBase trays.
- Co-Polymer membrane with a butyl rubber backing creates a completely watertight barrier.
- Polypropylene surface provides a key for the tile adhesive.
- Can be used with epoxy grout and solvent based sealers for stone tiles.
- Pre made corners for faster and easier installation.
- Self adhesive and supplied on a roll for easy application.
- No curing time to enable faster installation.
- Highly elastic, resistant to ageing, complete watertight barrier.
- Only 1mm thick with superior de-coupling properties of 10mm.
- Fully compatible with 150w/m2 underfloor heating.
- Watertight Lifetime Guarantee (domestic use) if fitted in accordance with manufactures instructions.
WG10 - 5²m Floor Tanking Membrane Kit
- 5m sq Impey WaterGuard® Floor Membrane
- 500ml BAL primer
- 15m jointing tape
- 5 x internal corners
- 1 x external corners
- Butyl sealant
- 10m sq Impey WaterGuard® Floor Membrane
- 500ml BAL primer
- 20m jointing tape
- 5 x internal corners
- 1 x external corners
- Butyl sealant
- 10m sq Impey WaterGuard® Wall Membrane
- 500ml BAL primer
- 10m jointing tape
- Butyl sealant
- 5m sq Impey WaterGuard® Floor Membrane
- 10m sq Impey WaterGuard® Wall Membrane
- 2 x 500ml BAL primer
- 15m jointing floor tape
- 10m jointing wall tape
- 5 x internal corners
- 1 x external corners
- 2 x Butyl sealant
- 10m sq Impey WaterGuard® Floor Membrane
- 10m sq Impey WaterGuard® Wall Membrane
- 2 x 500ml BAL primer
- 20m jointing floor tape
- 10m jointing wall tape
- 5 x internal corners
- 1 x external corners
- 2 x Butyl sealant
Additional jointing tape, internal and external corners can be purchased separately if required.
Impey WaterGuard Installation - Floors
Impey WaterGuard Installation - Walls
Impey WaterGuard Data Sheet
Impey WaterGuard membrane kits are the next generation of wetroom waterproofing systems. It provides a faster and easier method of tanking a leak-free wetroom area.
WaterGuard® features a new fleece membrane with a self adhesive butyl rubber backing, which is fast and easy to install.
WaterGuard provides the complete leak-proof sealing solution, at just 1mm thick WaterGuard is strong, flexible and versatile making tanking a wet room faster and easier. It comes with a lifetime guarantee*, so you can install with complete confidence.
Unlike many other systems Impey WaterGuard® can be tiled as soon as it has been fitted saving both installation time and cost.
*Lifetime of the replacement of tiles.
Description:
Self adhesive on one side:
WaterGuard has a butyl rubber adhesive on one side only and a co-polymer surface on the other. This makes installation much easier as the installer can work on the membrane without getting stuck.
Preformed corners (Floor Kits Only):
Sealed, pre-formed internal and external corners reduce the likelihood of leaks. Eliminating the time consuming process of manually creating corners as with Tilesafe.
Superior waterproofing capabilities:
Tests have proven that WaterGuard provides superior waterproofing capabilities to Tilesafe. The test was conducted with a 150mm head of water over a series of weeks. No leak from WaterGuard.
Excellent crack bridging properties:
Tests have shown that WaterGuard has superior lateral movement (5mm)
absorption properties caused by the shifting and drying of floors over time.
Not sensitive to chemicals:
Can be used with epoxy grout and solvent based sealers for stone tiles - unlike Tilesafe.
Supplied with a butyl sealant:
Part of the pack, so no need for the installer to purchase separately. Can also be used to repair small holes in the membrane, if damaged.
Guide lines for easy measurement:
Pre-printed grid lines provide an accurate guide when trimming the membrane.
Supplied with 150mm wide jointing tape:
WaterGuard cannot be overlapped, so a jointing tape is supplied to create a watertight seal at any joints.
Please note: IMPEY WATERGUARD is NOT compatible with the Wetrooms Online WetBase trays.
- Co-Polymer membrane with a butyl rubber backing creates a completely watertight barrier.
- Polypropylene surface provides a key for the tile adhesive.
- Can be used with epoxy grout and solvent based sealers for stone tiles.
- Pre made corners for faster and easier installation.
- Self adhesive and supplied on a roll for easy application.
- No curing time to enable faster installation.
- Highly elastic, resistant to ageing, complete watertight barrier.
- Only 1mm thick with superior de-coupling properties of 10mm.
- Fully compatible with 150w/m2 underfloor heating.
- Watertight Lifetime Guarantee (domestic use) if fitted in accordance with manufactures instructions.
WG10 - 5²m Floor Tanking Membrane Kit
- 5m sq Impey WaterGuard® Floor Membrane
- 500ml BAL primer
- 15m jointing tape
- 5 x internal corners
- 1 x external corners
- Butyl sealant
- 10m sq Impey WaterGuard® Floor Membrane
- 500ml BAL primer
- 20m jointing tape
- 5 x internal corners
- 1 x external corners
- Butyl sealant
- 10m sq Impey WaterGuard® Wall Membrane
- 500ml BAL primer
- 10m jointing tape
- Butyl sealant
- 5m sq Impey WaterGuard® Floor Membrane
- 10m sq Impey WaterGuard® Wall Membrane
- 2 x 500ml BAL primer
- 15m jointing floor tape
- 10m jointing wall tape
- 5 x internal corners
- 1 x external corners
- 2 x Butyl sealant
- 10m sq Impey WaterGuard® Floor Membrane
- 10m sq Impey WaterGuard® Wall Membrane
- 2 x 500ml BAL primer
- 20m jointing floor tape
- 10m jointing wall tape
- 5 x internal corners
- 1 x external corners
- 2 x Butyl sealant
Additional jointing tape, internal and external corners can be purchased separately if required.
Impey Wetrooms
Impey are a leading name in wet rooms, pioneering many of the innovations which make the luxury and style of a wet room accessible to all.
Enjoy an outstanding showering experience with more space to relax and refresh. It's a great way to enhance your lifestyle add value to your home, and with Impey there is a comprehensive choice of solutions to suit everyone and every living space - from designer style apartments and hotel suites to family bathrooms, period residences, smaller flats and en-suites.
Every Impey wet room comes with impressive specialist technology built in, to ensure a great performance, easy installation and the complete leakfree solution. Impey products are designed and manufactured in the UK, and come with excellent guarantees for a lifetime of luxurious showering.
Lear More