Impey Aqua Dec Easy Fit Wet Room Base Floor Former - 1200 x 1200mm
SPECIFICATION
- 1200 x 1200 x 22mm
- ROTATING DRAIN FOR AVOIDANCE OF JOISTS
- UNDER-SUPPORT NOT REQUIRED
(≤ 400mm Centres) - COMPLETE WITH DRAIN FOR TILED** FLOORS
- SUPPORTS OVER 300KG
- CAN BE TRIMMED - SEE GUIDE
- LIFETIME GUARANTEE*
SUITABLE FOR
- WOOD OR CONCRETE SUBFLOOR
- TILED FLOOR FINISH
- WET ROOMS
- LEVEL ACCESS
- RAISED ON PLATFORM
- USE WITH WHEELCHAIRS
- FITTING DIRECT ON JOISTS
- UNDERFLOOR HEATING
NOT SUITABLE FOR
- MICRO-CEMENT
The new Aqua-Dec EasyFit solves the potential installation problem of the drainage point being obstructed by joists within timber floors. A unique, patent protected drainage feature allows the installer torotate the drain aperture to any position that will avoid the joist, or any other under floor obstruction. The Aqua-Dec EasyFit requires no underboarding and will support over 300kg (47 stone) when fitted directly to standard floor joists.
The Impey Aqua-Dec EasyFit has a computer designed celluar structure, which is compression moulded from high glass content SMC to provide the strongest most rigid construction on the market. Can be installed directly onto floor joists (at 400mm centres, joists that exceed this will require underboarding) with no additional support or bedded into screeded floors, and will support over 300kg (47 stone) when fixed directly to standard floor joists.
The Aqua-Dec EasyFit is designed to provide the gradient required in the showering area for water drainage. What makes them so special is their extreme strength and rigidity, whilst only being 22mm thick at the outer rim. The low profile is specially engineered to be the same depth as standard floorboards. You simply remove the floorboards and fix the Aqua Dec to the floor joists (at 400mm centres, joists that exceed this will require underboarding).
The revolutionary rotating drain point allows the drain position to be rotated through 360° to any position to avoid joists. If you need to trim or cut the Aqua Dec to avoid an obstruction it can be cut wioth a universal hand saw and drilled to provide additional screw fixing holes.
All Aqua-Dec EasyFits come with a tiled** floor gully horizontal outlet drain as standard. The gully is a high quality water trap featuring a 50mm water seal, flexible 50mm outlet and a 50-40mm solvent weld reducer.
The height adjustable rings adjust to suit tile depths between 6mm and 26mm depending on waterproof membrane and adhesive thickness. The tanking ring secures the waterproofing membrane into place creating a secure watertight seal at the drainage point. The drain comes complete with a high quality, 4mm thick, stainless steel grate. Alternatives are available for vinyl flooring etc.
The Impey Aqua Dec Easy Fit can be cut to size, see the following for full details: Impey Aqua Dec Cutting & Drilling Guidelines (PDF).
*All Impey Aqua-Dec EasyFit bases carry a lifetime guarantee if installed according to the manufacturers instructions.
Drain Outlets
The Impey Aqua Dec Easy Fit is supplied with a waste outlet to suit a TILED** floor.
Other drain outlets including, vertical, low profile and pumped waste outlets are also available. Please call 0800 280 8008 to request these drain outlets.
Vinyl Floor
For Impey Level Dec for VINYL floors please click here: Impey Level Dec - Vinyl floor
**If finishing the floor with TILES a tanking membrane such as Impey Waterguard should be laid first.
- Size: 1200 x 1200mm
- Suitable for TILED* floors
- No under boarding required
- Supports over 300kg (47 Stone)
- 22mm thick
- Lightweight yet strong
- Rotating drain through 360° to allow for the avoidance of joists
- Can be cut to size, see the following for full details: Impey Aqua Dec Cutting & Drilling Guidelines (PDF).
- Lifetime Guarantee
- Drain Included - Tiled / Horizontal outlet.
- Designed & Manufactured in the UK
*Tiled floors will require a tanking membrane such as Impey WaterGuard to be laid before the tiles.
Rotating drain
The EasyFit drain plate can rotate 360 degrees and avoid all underfloor wet room obstructions. The eccentric drain also features three locating rings, to provide superior hold between the Dec and the rotating drain plate.
Unbeatable strength
The new Aqua Dec EasyFit wet room Dec is stronger than the original Aqua-Dec and requires NO UNDER BOARDING
Portable
The Aqua Dec EasyFit is over 20% lighter than the original Aqua-Dec. The unique EasyFit material is also stronger but lighter.
Easily trimmable
The Aqua Dec Dec EasyFit wet room Dec can be cut anywhere up to the solid surround with a standard handsaw.
EasyFit is 22mm thick
The new Aqua Dec EasyFit is consistently 22m thick around the perimeter.
Underside cellular structure
The underside spoke pattern provides increased rigidity to the structure of the Dec.
Wooden or concrete floor installation
Aqua Dec EasyFit can be fitted on wood and concrete floors as the spoke structure bonds well with wet concrete.
Impey AquaDec EasyFit - The easiest way to install a wet room.
Before the Impey AquaDec EasyFit, a typical installation of a wetroom floor former initially required the wetroom area to be under boarded with a ply-wood board. Eliminating this process with AquaDec EasyFit, has significantly reduced installation time.
Download the Impey AquaDec EasyFit Installation Guide:
Impey AquaDec EasyFit Installation Guide (PDF)
Other useful downloads:
Impey Waterguard Installation - Floors
Impey WaterGuard Installation - Walls
Impey WaterGuard Data Sheet
